Rental License Lookup

Rental registration, rental license, inspection certificate: what each one means

Cities use different words for different obligations. What a registration, a rental license, a certificate and a routine inspection each ask of a landlord, with real examples from Minneapolis, Davenport, Cleveland, Columbus and more.

By the Rental License Lookup deskPublished November 21, 2026Not legal advice
A close-up shot of a hand holding a house key, indicating new ownership or rental.
Photo: Kindel Media on Pexels

Two cities can use the same word for very different obligations, or different words for the same one. What a city calls its program matters less than what it actually asks you to do. Almost every program is built from four parts.

1. Registration: the city wants to know who you are

Registration is the lightest kind. You tell the city who owns the rental and how to reach the owner or a local contact, and you usually pay a fee. It often repeats every year. Registration alone doesn't mean anyone inspects the home.

Example: Columbus is new to this. Every Columbus rental must now be registered each year, at $15 per unit with a $1,500 cap per complex. The city's registry page lists January 1 to March 31, 2027 as the 2027 registration period. Columbus adds a twist: registered properties also get a city "Preventative Education Inspection" about every three years. It covers exteriors, common areas and shared systems, and goes inside a unit only if the tenant or owner asks. Columbus rules.

2. A rental license or permit: permission the city can take away

A license or permit is permission to rent. The difference from registration is leverage. A city can deny, suspend or revoke a license, so open violations, unpaid fees or a failed inspection can stop you from renting. In most cities on this site, the license is also what triggers inspections.

Example: In Minneapolis, every unit the owner doesn't live in needs a license that expires each March 1. The city sorts buildings into tiers based on two years of violation and management history. The tier sets both the fee and how often the building is inspected: every 8 years for Tier 1, every 5 for Tier 2, every year for Tier 3.

3. Routine inspections: someone walks through on a schedule

A routine inspection program sends an inspector through the home on a cycle, not just when a tenant complains. Cycles vary a lot, and many cities reward clean inspections with longer gaps:

  • Davenport scores each property with a violation-point matrix. Up to 100 points means a 4-year cycle, 101 to 199 means 3 years, and 200 or more means every 2 years.
  • Ames issues a Letter of Compliance for 1 to 4 years depending on the property's violation and complaint history.
  • Saint Paul grades buildings A through D and re-inspects every 6, 4, 2 or 1 years accordingly.
  • Maple Heights works differently: it inspects each time a unit gets a new tenant, and the unit must pass before the tenants move in.

Who inspects differs too. Most cities send their own inspectors. Others accept private inspectors, or require them for certain steps. In Iowa, regular rental inspections aren't optional for larger cities: state law requires cities of 15,000 or more people to have a program of regular rental inspections and certification of inspected rentals (Iowa Code § 364.17).

4. Certificates: proof that the home passed

A certificate is the document you get after passing, and some cities make it a condition of renting at all. Des Moines issues its rental license only after a passed inspection, and its length (9 months to 3.5 years) depends on how many violations the inspector finds. A lead-safe certificate is a special case. In Toledo, pre-1978 rentals with 1 to 4 units need one, and it requires a passing visual check and a lead dust clearance exam by an inspector registered with the city.

How to read your city's program

Whatever your city calls its program, these five questions tell you what it means for you:

  1. Do I need it before a tenant moves in, or only within a set time after?
  2. Is there a routine inspection, and who does it: the city or a private inspector I hire?
  3. How often does it renew, and on what date?
  4. Does it change when I buy or sell the property?
  5. Is there a separate lead requirement for older homes?

Every city page answers those five questions from the city's own sources, and the checklist tool applies them to your property.

Sources

  1. Minneapolis: rental license tiers
  2. Saint Paul DSI: Fire Certificate of Occupancy information
  3. Davenport: rental inspection program (Violation Point Matrix)
  4. Ames: Rental Housing Code, Chapter 13
  5. Des Moines: rental inspections
  6. Columbus Building and Zoning Services: Rental Registry
  7. Maple Heights: rental registration and inspection
  8. Toledo: Lead-Safe Certificate
  9. Iowa Code § 364.17 (city housing codes)

Sources checked November 21, 2026. General information, not legal advice.